Hey Guys. Is there a way to obtain rinex or obs data from the R2A lidar? for the correction of the images that he takes, this with the purpose of taking an orthophoto with precision. since when I make one with the original images it comes out with a notable displacement.
It goes without saying that the orthophoto is through a PPK process, not RTK.
Hi @Dronematic There isn’t a way to obtain RINEX or OBS data from the R2A Lidar itself. The images are PPK corrected after going through processing in Rock Desktop and have those geotags. We usually see these tighten up when a known point is entered for the base station in-lieu of calculating its average position. Another factor if you see holes in the orthomosaic could be too low of overlap.